Wera 932 S/6 Chiseldriver Screwdriver Set, 6 Pieces
Chiseldrivers exist because screwdrivers get used as chisels anyway — so Wera built one that does both on purpose, and then gave it a third trick. The 932 S/6 puts six strike-ready drivers on a wall rack: three 932 AS slotted, one 932 A slotted, and two 917 SPHS Phillips. The hexagonal blade runs right through the handle, so a hammer blow travels straight from the impact cap to the fastener without the handle absorbing any of the shock. But the clever part is in the end cap itself: an integrated square take-up lets you drop a 1/4-inch or 3/8-inch ratchet, T-handle, or Mini ratchet onto the back of the driver and use it like a compact breaker bar — perfect for fast turning under load, no hammer required. Either way, force transfers full strength, the ductile tempered blade refuses to splinter, and the impact cap extends the service life of the tool and the workpiece.
The Black Point tip and a refined hardening process deliver a long-lived tip with exact fit and corrosion resistance. The hexagonal anti-roll feature keeps tools put on sloped benches, and the wall rack pins the whole set where it can be grabbed. It is the fast-fastening, chiseling, and loosening answer for automotive work, heavy equipment, and anywhere seized screws hold ground.
What is in the set
917 SPHS Phillips chiseldriver: PH 1 x 90mm, PH 2 x 113mm
932 A slotted chiseldriver: 0.6 x 3.5 x 80mm
932 AS slotted chiseldriver: 0.8 x 4.5 x 100mm, 1.0 x 5.5 x 113mm, 1.2 x 7 x 138mm
Rack for wall mounting
Key Features
6 Chiseldrivers for fastening, chiseling, and loosening seized screws
Pound-thru hex blade for full force transfer when struck
Impact cap with integrated square take-up for 1/4"/3/8" ratchet or T-handle drive
Black Point tip for long life and exact fit
Kraftform handle with anti-roll hex
Includes wall rack; made in the Czech Republic
Hammer it, cranked a ratchet through it — either way, it takes it.
