Wera Zyklop Pocket Go Kart Edition - The Hip Check by Tailored Tools

The Hip Check — One Last Check Before Grid

Your driver hits the wall at Supernats, then gets collected by another kart. First comes the wait for recovery. Then the scale line. By the time you collect your driver and cross the paddock, you’re already counting the minutes you have left to rebuild the kart, visit Tiago, and make the next session.

Somehow, you get it done. You sprint to grid and find your place in the snake. Now you have a few spare moments, a kart that’s just been put back together, and a toolbox that is stowed under the kart with no room to work.

That’s where The Hip Check earns its place on your belt. Built by Tailored Tools around the Wera 8009 Zyklop Pocket Set 2, this custom Go Kart Edition keeps a ratchet, karting-focused bit selection, and metric sockets close at hand for those last-minute checks and small adjustments before your driver heads out.

It’s just as useful on a quieter club weekend. When routine tech inspection prep calls for a few accessible fastener checks rather than your entire toolbox, bring the essentials on your hip instead of hauling the whole drawer to tech.

The Hip Check isn’t a replacement for a thorough post-incident rebuild, or a SKUSA front runner tech, or your full trackside toolbox. It’s the kit you carry for the small jobs and final checks when time is short and the tent is too far away.

Key Features

• Custom karting-focused configuration by Tailored Tools, built from the Wera 8009 Zyklop Pocket Set 2.
• 12 interchangeable 25 mm bits stored in the handle’s captive swivelling magazine.
• Metric hex coverage: 2.5, 3, 4, 5, 6, 7, and 8 mm.
• PH1 and PH2 Phillips bits, two slotted bits, and a T25 TORX bit.
• Combination mounting accepts 3/8-inch-drive sockets and 1/4-inch hex bits directly.
• Pivoting head locks straight or at 15° and 90° to either side.
• 72-tooth reversible ratchet with a 5° return angle.
• 75 mm magnetic bit holder adds reach for recessed screws.
• Textile belt holster with Wera 2go compatibility.

What's In This Set

• 1 × Wera 8009 Zyklop Pocket ratchet, 133 mm long, from base set 05004281001.
• 1 × 893/1/1 universal bit holder, 1/4-inch × 75 mm — 05091103001.
• 1 × 851/1 BTZ Phillips bit, PH1 × 25 mm — 05056420001.
• 1 × 851/1 BTZ Phillips bit, PH2 × 25 mm — 05056422001.
• 1 × 800/1 TZ slotted bit, 0.5 × 4 × 25 mm — 05056203001.
• 1 × 800/1 BTZ slotted bit, 1 × 5.5 × 25 mm — 05056066001.
• 1 × 867/1 BTZ TORX bit, T25 × 25 mm — 05066126001.
• 1 × 840/1 BTZ hex bit, 2.5 mm × 25 mm — 05056682001.
• 1 × 840/1 BTZ hex bit, 3 mm × 25 mm — 05056683001.
• 1 × 840/1 BTZ hex bit, 4 mm × 25 mm — 05056684001.
• 1 × 840/1 BTZ hex bit, 5 mm × 25 mm — 05056685001.
• 1 × 840/1 BTZ hex bit, 6 mm × 25 mm — 05056687001.
• 1 × 840/1 Z hex bit, 7 mm × 25 mm — 05056332001.
• 1 × 840/1 Z hex bit, 8 mm × 25 mm — 05056335001.
• 1 × 8790 HMB socket, 3/8-inch drive, 8 mm × 29 mm — 05003553001.
• 1 × 8790 HMB socket, 3/8-inch drive, 10 mm × 29 mm — 05003555001.
• 1 × 8790 HMB socket, 3/8-inch drive, 13 mm × 29 mm — 05003558001.
• 1 × 9468 Zyklop Pocket holster — 05136408001.

This is a custom configuration by Tailored Tools, not a standard factory-packaged Wera edition.

The toolbox stays at the tent. The last check comes with you.